Description
Specification of Briidea CO₂ Controller
Input Voltage: 100~240Vac 50/60Hz
Load Max Current: 15A@120Vac/10A@220Vac
Load Max Wattage: <1800W(3/4hp)
CO2 measurement range: 0-5000ppm
CO2 measurement accuracy: ±50 ppm or ±5% of reading, whichever is greater
CO2 display accuracy: 1ppm
CO2 warm-up time: 3min
CO2 response time: <120s
Ambient temperature: -20℃~60℃/-4℉~140℉
Humidity: 0%~95%RH(Unfrozen or condensation state)
Running Mode
Photo Sensor Mode
•When the photo sensor detects light and the CO₂ level is low, it will activates its CO₂ outlet, turning on the connected regulator or generator.
•When no light is detected during the night, it will turn off the connected CO₂ device, which greatly improve the CO₂ using efficiency.
•Before entering the confirmation state Day or Night state, there will be continuous 30 seconds detection.
Manual Mode
The controller will turn the load on/off according to the current setting ppm at any time of the day or night.
Program Mode
Featuring six stand-alone programs just like six separate timers, which means the start time of six programs can be freely set by users. The amount of CO₂ required varies from different light intensity in each period of the day. Such as when light is weak, too much CO₂ will be wasted because of weak photosynthesis. So set different CO₂ ppm value for different periods will greatly minimize CO₂ waste, realize time-sharing precise control.
Off Mode
In off mode, the controller will always turn the load off but will keep detecting.
Why Briidea CO₂ Controller is Perfect for You
Adjustable Light Sensing Sensitivity
Light sensing sensitivity is the ability of the photo sensor to respond to light intensity:
HI: Under strong light intensity, the sensor will respond to the daytime state.
MI: Under Middle light intensity, the sensor will respond to the daytime state (default).
LO: Under Low light intensity, the sensor will respond to the daytime state.
Alarm Function
You can choose whether to use the alarm function or not. When you turn off the alarm function, the controller will not alarm whatever the CO₂ value is, to avoid too much noise. When the alarm function is turned on, the controller will alarm to remind you if the humidity value exceeds the high/low setting value.
Adjustable Backlight
The screen is lit at high intensity for 8 seconds when you press any button. For the rest of the time, there are three backlight mode for you to choose :
Off: The screen is not lit (default mode).
On HI: The screen is lit at high intensity.
On LO: The screen is lit at low intensity.
