Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Description
Why the Briidea Humidity Controller is Perfect for You
Auto/Manual Mode
Two modes to meet variety practical requirements. Press M button, the controller can turn on/off the load immediately in any case. When manually opened, you can set the manual on time for 0.5-60 minutes, then the controller will return back to the automatic mode after running the set time or press the M key again. Similarly, manual off time can also be set from 4h to 16h.
Settable Alarms
In the settings, you can choose whether to turn on the alarm function or not. When you turn off the alarm function, the controller will not alarm you whatever the humidity value is, to avoid too much noise. But it can still alarm when sensor error occurs. When the alarm function is turned on, the controller will alarm to remind you if the humidity value exceeds the high/low setting value.
Lock Button
The buttons can be locked to avoid touching by mistake. Simultaneously press the Up+Down buttons for 3 seconds, the keys will be locked. In this state, pressing any button will turn on the backlight, and other functions cannot be used. The buttons must be unlocked for normal use. Press the Up+Down buttons again for 3 seconds, the keys will be unlocked.
Easy Installation
Super Easy Install Process, several minutes tops that's all it took. Two installation methods are offered, one is pasting by 3M tapes, the other one is fixing by screws and expansion nails.
Long Duty Cords
Using 4.9 feet long power plug cable and 9.8 feet long sensor cable. No complicated wiring. Both cords are heavy duty cords. The cable is long enough to install the humidistat in the suitable place.
Wide Application
It's widely used for greenhouse, mushrooms planting, ventilator, reptiles incubating, seed germination, cheese making, curing chamber, fresh storage, laboratory etc. Compatible with humidifiers, dehumidifiers and fans of max power 1200W@110V, 1800W@220v.